Rad DMX Transmitter and Receiver Wireless

Rad DMX transmitter and receiver wireless

Brief:
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console )by wireless way, which solves lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on, It get rid of connecting cable limited completely
And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.
This product adopt 2.4G ISM frequency section( global opening section) without permission limited
High effective GFSK modulate, communication design; 126 channels jumping frenquecy automaticly, high anti-jamming ability.

Application:
Stage lighting, Disco hall, Large literature performance, Gymnasium lighting, Temporary stage performance, City lighting system, TV station, Conference center, professional showplace, Topic park, Bar lighting and so on.

Product Feature:

Product name: 2.4G wireless DMX512 R/T
Tricolor LED displaying
126 channels jumping frenquecy automaticly, high anti-jamming ability. To ensure works reliability
7 groups ID code settable, User can use 7 groups individual wireless net without any interfere each other in the same place...
Input voltage: 5VDC 500mA MIN
Communication distance: 400M(visible distance, it has some different base on environment)
Work frequency section: 2.4G ISM, 126 channels. Frequency section
Max transmitting power rate: 20dBm
Receiver sensitive: -94dBm
Signal port: 3pin male plug

Operating manual:

ID code and LED color corresponding relateship:
1: RED
2: GREEN
3: RED+GREED
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREED+BLUE
Press key 1 time to indicate ID setting, , Press again to set IC, then ID value adding 1 each time. By press
Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiveing
RF frequency- - - - - - - - - - - - 2.400-2.525 G, total 126 channels, it's searching automaticly,
ID Code- - - -"1-7" groups ID code, press "KEY" for setting, it only can works under same ID code. Of transmitter and receiver.